Test report DSG-3042 · Rev C · tested November 6, 2026
Memory & StorageDevice under test
SK hynix Solidigm weighs $100B for two U.S. NAND fabs
Solidigm reportedly plans two U.S. NAND fabs at a potential $100 billion cost, while IPO, China export-license and Kioxia bond options shape the funding.
- Read
- 3 min
- Words
- 667
- Node
- 3nm
- Operator
- Elena Vasquez
Spec summary
- Solidigm reportedly plans two U.S. NAND fabs at Marcy Nanocenter in Oneida County, New York.
- Each fab carries an estimated cost of US$40 billion-US$50 billion, for a combined US$100 billion or KRW 133 trillion.
- The first fab would have capacity for 100,000 12-inch wafers per month; New York State considers up to US$50 million for site preparation.
- SK hynix suspended Solidigm’s pre-IPO fundraising and IPO review on October 23 and held KRW 114.46 trillion in cash-like assets in Q3.
- Kioxia-linked bonds held through SPC2 are worth about KRW 23 trillion; Kioxia’s share price has fallen around 64% from its June peak.
![[News] SK hynix Solidigm Reportedly Eyes US$100B for 2 U.S. NAND Fabs, Kioxia Bonds Seen as Potential Funding Option - T](/media/83/83e71df3217ed209.1280.webp)
SK hynix’s Solidigm reportedly plans two U.S. NAND flash fabs with a combined estimated cost of US$100 billion, putting each fab at US$40 billion-US$50 billion.
What would Solidigm build in New York?
Solidigm, SK hynix’s NAND flash subsidiary, reportedly plans to develop Marcy Nanocenter in Oneida County, New York. The site would become its first NAND fab in the United States. Seoul Economic Daily says the expansion targets growing advanced NAND demand tied to the AI data-center boom.
- Two fabs would arrive in phases, starting with a line with capacity for 100,000 12-inch wafers per month.
- At a sustained 12-month rate, the opening capacity equals 1.2 million wafers a year.
- Each fab carries an estimated cost of US$40 billion to US$50 billion.
- The two-fab total reaches US$100 billion, or about KRW 133 trillion.
- New York State is considering up to US$50 million for site preparation.
Only the opening stage has a disclosed capacity. The proposal does not specify the second fab’s monthly output, construction sequence or production start date, leaving the eventual supply contribution unquantified.
Marcy Nanocenter sits roughly one hour’s drive from Clay, New York, where Micron is developing a DRAM manufacturing hub. Seoul Economic Daily says the proximity could help Solidigm strengthen its supply chain and secure skilled workers.
SK hynix said: “No final decision has been made.” The company also said that Solidigm’s U.S. fab plans remain under consideration.
How would SK hynix finance the expansion?
Financing remains unresolved after SK hynix suspended its review of Solidigm’s pre-IPO fundraising and IPO plans on October 23. That suspension removed a potential source of outside capital for the proposed facilities.
SK hynix held KRW 114.46 trillion in cash-like assets at the end of the third quarter. The group must also finance manufacturing investments in South Korea and overseas, so those commitments compete with Solidigm’s U.S. project for corporate capital. The proposal does not disclose a committed financing structure for both phases.
Could China expansion help fund the fabs?
Reuters reports that SK hynix is seeking U.S. export licenses to expand NAND production at its Dalian plant in China. SK hynix aims to generate revenue from that expansion to help finance Solidigm’s proposed U.S. fabs.
Solidigm executives have met U.S. Commerce Department officials nearly 10 times since late August, including Commerce Secretary Howard Lutnick. Officials have not approved the requested licenses and remain reluctant to allow equipment exports that would expand Chinese chipmaking capacity. The licenses therefore represent an open regulatory gate, not an established funding source.
Can Kioxia bonds close the funding gap?
SK hynix holds remaining Kioxia-linked convertible bonds through special-purpose company SPC2, and Dealsite estimates their value at about KRW 23 trillion. The holding could help finance the U.S. expansion.
The trade-off involves valuation and control. Kioxia’s share price has fallen around 64% from its June peak, while selling the investment could mean giving up potential influence over Kioxia’s management. SK hynix must balance the immediate funding need against that longer-term strategic position.
What changes for the NAND market?
If SK hynix approves and finances the project, Solidigm would establish its first U.S. NAND manufacturing base and add an opening line with capacity for 100,000 12-inch wafers per month, equivalent to 1.2 million annualized. The proposal directly targets NAND demand associated with AI data centers.
The US$100 billion figure remains an estimate, not committed capital. New York’s possible US$50 million contribution concerns site preparation, while the IPO, China export-license and Kioxia bond-sale routes each remain unresolved.
For NAND buyers, the project signals a prospective U.S. supply source rather than near-term inventory. The immediate market effect centers on investment, policy and financing decisions; added wafer supply follows only if SK hynix commits capital and construction proceeds.
via Google News: Semiconductor foundry (Source)
More from Elena Vasquez
Show full bio
Senior reporter covering people, launches and day-to-day practice in hardware layer of artificial intelligence at Die Signal.
675 articles
Same lot · LOT-360D
- DSG-410110nmSK Hynix Commits $38 Billion to Two New DRAM and NAND Plants
- DSG-96745nmSK hynix approves $38.3bn for two memory fabs in South Korea
- DSG-295845nmSK Hynix plans $654M Trinity Fab for May 2027 in Yongin
- DSG-997465nmGlobalFoundries to build two New York fabs under $21bn US-Japan deal
- DSG-848210nmSK hynix Opens $596 Million Test Fab to Cut Supplier Cycles to Two Years