Test report DSG-6109 · Rev F · tested November 17, 2026

AI Datacenter InfrastructureDevice under test

TECO Unveils 2.7 MW HULK 3.0 Data Center Modules in Warsaw

TECO showed a 2.7 MW HULK 3.0 and 4.2 MW HULK 6.0 modular data center plus a 50-410 kW EV powertrain range in Warsaw on November 17, 2026. No customers or prices named.

Read
3 min
Words
660
Node
65nm
Operator
Priya Raman

Spec summary

  1. HULK 3.0 MDC: 10 modules, 2.7 MW IT load, 12 racks, shown November 17, 2026 in Warsaw
  2. HULK 6.0 MDC: 22 modules, 4.2 MW per data hall, 24 racks, integrated power and fire protection
  3. EV powertrain range spans 50-410 kW and 250-800 V, built around the OD180 hairpin motor
  4. No customers, prices, executives, or chip suppliers named in the release
  5. TECO trades on the Taiwan Stock Exchange under ticker 1504
TECO’s 2.7 MW HULK 3.0 Data Center Debuts in Warsaw
Fig. ATECO’s 2.7 MW HULK 3.0 Data Center Debuts in Warsaw — Akela999 / pixabay

TECO Electric & Machinery (TWSE: 1504) unveiled a 2.7 MW modular data center and a 50-to-410 kW EV powertrain line at TEEMA Technology Park Industry Day in Warsaw, Poland, on November 17, 2026. The two-day event runs through November 18. The announcement, carried by TradingView, names no customers, prices, or deployment sites.

What did TECO announce?

The Taipei-based manufacturer presented two product families to Polish and wider European industrial visitors. The first is the HULK line of Modular Data Centers (MDC, factory-built data center blocks shipped to site for assembly). The second is an EV powertrain range built around the TECO OD180 hairpin motor, spanning 250 to 800 V.

The HULK 3.0 comprises 10 modules, carries 2.7 MW of IT load, and houses 16 "advanced computing systems" (vendor wording, undefined) and 12 IT racks. Dividing the published figures gives an average of 225 kW per rack. That is our arithmetic, not a TECO claim, but it sits far above the single-digit kilowatt racks that defined enterprise server rooms a decade ago.

The HULK 6.0 uses 22 modules and delivers 4.2 MW of IT load per data hall, with up to 16 advanced computing systems and 24 IT racks. The larger design integrates power distribution, cooling, fire protection and monitoring. That list reads like a full-facility package rather than a rack enclosure.

  • HULK 3.0: 10 modules, 2.7 MW, 16 computing systems, 12 racks, CDU and CRAC cooling
  • HULK 6.0: 22 modules, 4.2 MW per data hall, up to 16 systems, 24 racks, integrated power, fire protection, monitoring
  • Price: not stated for either

Why does the cooling detail matter?

The HULK 3.0 names Coolant Distribution Units (CDUs, devices that move liquid coolant between facility loops and server loops) and Computer Room Air Conditioning (CRAC) units. The pairing indicates a hybrid liquid-and-air design, which matches most current AI deployments.

The release gives no coolant type, no supply temperature, and no efficiency metric such as power usage effectiveness. Operators cannot compare the cooling plant against rivals without those numbers. That omission will likely surface in buyer conversations in Warsaw, given electricity is the sector's largest running cost.

What about the EV side?

The OD180 uses hairpin winding: rectangular copper conductors shaped like hairpins replace round wire in the stator slots, packing more copper into the same space and improving heat transfer. The range spans an eightfold power spread, wide enough for urban vehicles through performance or light commercial platforms. The announcement gives no torque, speed, efficiency, or weight figures, and names no customers.

The 800 V upper bound is the figure engineers will note. High-voltage architectures charge faster and carry less current for a given power, cutting cable weight. A family spanning 250 to 800 V can serve both older 400 V-class platforms and newer designs.

What has TECO not said?

The gaps are significant. No TECO executive is quoted. No chip supplier, cloud provider, or AI accelerator partner is named. No reference deployment exists in Europe, and rivals with installed bases can point to completed halls while TECO, on this evidence, cannot. The specifications reflect design intent from the company's own release, not measured field results.

What happens next?

The immediate market impact is small. A trade-show exhibit does not move revenue, and investors tracking TWSE: 1504 will find no financial guidance in the release. The strategic signal is larger: TECO joins several industrial suppliers relabeling electrical and cooling lines for the AI buildout, a pattern that will crowd the modular market over the next two years.

Expect a reference customer before a price list, and expect efficiency data to become mandatory for EU sales as regulators scrutinize sector energy use. Whether Warsaw generates orders depends on cooling efficiency figures, local support, and the availability of computing hardware to fill the modules. Nothing in the announcement guarantees any of it.

via shattered.io (Source)

Filed under

  • teco
  • modular-data-centers
  • data-center-cooling
  • ev-powertrains
Share this article:

More from Priya Raman

Priya Raman

Show full bio

Correspondent covering money, funding and market shifts around hardware layer of artificial intelligence at Die Signal.

661 articles

Same lot · LOT-362D

« Previous articleNext article »