Test report DSG-9008 · Rev E · tested November 16, 2026

Memory & StorageDevice under test

Nanya and Winbond to Buy ASML EUV Tools for Taiwan DRAM Push

Nanya has budgeted up to $10.53 billion for Fab 5A equipment including ASML EUV tools, deploying them in Q1 2027; Winbond targets 14nm DRAM at Kaohsiung from 2030.

Read
3 min
Words
526
Node
28nm
Operator
Marcus Bennett

Spec summary

  1. Nanya's board approved up to US$10.53 billion for Fab 5A phase-one equipment covering 2026-2029.
  2. Nanya will deploy EUV tools at Fab 5A in Q1 2027, targeting 50,000 wafers per month by 2030.
  3. Winbond expects its first ASML EUV tool in about two years, using it from 2030 for 14nm DRAM.
  4. ASML High NA EUV machines cost roughly $370 million each, about double standard EUV units.
  5. TSMC and Samsung committed to High NA EUV in September 2026, starting 2030 and 2028 respectively.
Nanya and Winbond to purchase EUV tools from ASML to boost DRAM production in Taiwan
Fig. ANanya and Winbond to purchase EUV tools from ASML to boost DRAM production in Taiwan — ranjatm / pixabay

Nanya Technology has budgeted up to US$10.53 billion for phase-one equipment at its Fab 5A, a sum that includes EUV lithography tools from ASML. Winbond Electronics plans its own EUV purchase. Local media reports first carried the news. Neither company has disclosed what it will spend on the machines themselves.

The two deals extend EUV adoption deeper into the DRAM supply chain. ASML, based in the Netherlands, remains the sole global supplier of extreme ultraviolet lithography equipment. That gives the company a gatekeeping role over every advanced memory expansion now on the table in Taiwan.

What does Nanya's timeline look like?

Nanya will deploy EUV technology at Fab 5A in northern Taiwan in Q1 2027. The facility should begin production by the end of that year, the company said.

The board approved the investment plan in August. It covers equipment purchases between 2026 and 2029, with EUV tools folded into the same budget.

Capacity ramps in two stages, according to Nanya:

  • 30,000 wafers per month in 2028
  • Full capacity of 50,000 wafers per month by 2030

What does this change for Winbond?

Winbond expects to receive its first EUV tool from ASML in roughly two years, according to the reports. The company then hopes to start using EUV lithography at its Kaohsiung fab in southern Taiwan in 2030.

The target process is specific: second-generation 14nm DRAM nodes. That makes Winbond's move a capacity-plus-capability investment. It buys machines and, with them, a route to a denser generation of memory chips.

How does EUV actually work?

The mechanics are straightforward to state. EUV lithography uses 13.5nm light to print nanometer-sized transistors on silicon wafers. Shorter wavelengths allow finer features, which is why the technology has become the standard for advanced chipmaking.

ASML also sells High NA EUV machines, the most advanced lithography tools available. These require less light per exposure than traditional EUV machines, which cuts the time needed to print each layer and raises wafer output. The price reflects that advantage: each unit costs approximately $370 million, around double the price of a standard EUV machine.

Where do TSMC and Samsung fit in?

The memory makers are following larger customers into the technology. In September 2026, TSMC and Samsung committed to using ASML's High NA EUV lithography.

Their schedules differ:

  • Samsung plans to begin adopting the technology by 2028, for production of its memory chips
  • TSMC will start using the tools from 2030

High-NA machines are needed to make the most advanced 3nm and 5nm chips. That requirement ties the toolmaker, the foundries and the memory makers into a single dependency chain, with ASML at the center and every schedule running through its order book.

What happens next?

Watch the deliveries. Winbond's first tool lands in about two years. Nanya's EUV deployment at Fab 5A follows in early 2027, with production output measured against the 30,000-wafer mark in 2028. Spending figures for the lithography tools themselves remain undisclosed at both companies, so cost comparisons with the $370 million High NA units will stay speculative until one of them talks.

via datacenterdynamics.com (Source)

Filed under

  • dram
  • euv-lithography
  • asml
  • nanya-technology
  • winbond-electronics
Share this article:

More from Marcus Bennett

Marcus Bennett

Show full bio

News editor covering regulation, policy and their impact on hardware layer of artificial intelligence at Die Signal.

681 articles

Same lot · LOT-362C

« Previous articleNext article »